MAP Mapegrout SV Fiber 25kg

• High resistance to impact
• May be applied at low temperatures

Reccomendations 

•  Do not add cement to Mapegrout SV Fiber. ▪  Do not add admixtures to Mapegrout SV Fiber. ▪  Do not use Mapegrout SV Fiber if the packaging is damaged. ▪  Do not add water once the mix has started to set.
•  Do not apply Mapegrout SV Fiber on asphalt or on surfaces treated with bitumen.
•   Do not apply Mapegrout SV Fiber on smooth surfaces. Roughen the surface of the substrate (to at least 5 mm) and, if necessary, insert dolly rods.
•   Do not use Mapegrout SV Fiber if the temperature is lower than -5°C or higher +35°C.
•   Mapegrout SV Fiber hardens very quickly and it is recommended, therefore, to only mix quantities of mortar that will be applied within 10 minutes of adding the mixing water at +20°C.

TECHNICAL INFORMATION FOR PRODUCT PREPARATION

 Mix composition: 100 kg Mapegrout SV Fiber 13,5-14,5 kg of water

Thickness applied: 10-50 mm (For greater thicknesses, see the instructions in the ‘Preparation of the mortar’ paragraph)

Application temperature: Surrounding and substrate temperature from -5°C to +35°C +5°C +10°C +20°C

 Pot life of mix: 60 min. 20 min. 10 min.

 End of setting: 100 min. 60 min. 35 min.